saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear Belt, 4D|Page 7080 > < Rear Belt, 4D|Page 7078
Page 23
background image

1

Fold down the backrest.

2

Remove the head restraint from the seat.

3

Remove the speaker grilles on both sides.

4

Remove the clips at the front of the parcel shelf, 3 x.

5

Lift out the parcel shelf trim and pull out the center belt.

6

Unscrew the lower belt fixing, 1 nut.

7

Remove the center belt from the parcel shelf, 1 nut.

To fit

Fit in reverse order.
Check that the center belt runs in front of the locating pin and backrest.
Tightening torques
Inertia reel mounting nuts 45 Nm (33 ft. lbs.)
Floor mounting 45 Nm (33 ft. lbs.)

Note: Ensure that the belt runs correctly.

Rear Centre Belt, 4D

Rear Centre Belt, 4D

To remove

1. Remove Parcel shelf trim, 4D.
2. Unscrew the lower belt anchorage point (A).

Rear Belt, 4D|Page 7080 > < Rear Belt, 4D|Page 7078