9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
WARNING:
-
All Saab 9-5 models are equipped as standard with the SRS, including belt tensioners.
-
Work in accordance with the safety and handling instructions in Airbag Systems.
1. Fit the inertia reel and belt tensioner, 2 nuts and 1 screw.
Tightening torques: Inertia reel 45 Nm (33 lbf ft)
2. Reconnect the connector for the belt tensioner.
3. Draw the belt through the B-pillar trim and refit the strap guide.
4. Refit the B-pillar trim.
Check that the carpet and sill scuff plate are covered by the B-pillar trim.
5. Fit the door sealing strips around the B-pillar trim.
6. Attach the end fitting to the seat.
Check that the end fitting is correctly fitted by slackening the belt and pulling directly upwards with a force of 5 N. Check that the catch is visible
on the outside of the mounting.