9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
7. Blow clean with compressed air, undo the clamps on the boot and pull off the boot.
To fit
1. Clean the track rod and ball joint as necessary and lubricate with lithium grease such as Shell EP B2 Code 71303, Shell Retinax A or the
equivalent.
2. Fit a new boot onto the track rod and steering gear housing. Fit new clamps and use pliers 30 16 235 to clamp them.
3. Screw the locknut onto the track rod.
4. Screw in the track-rod end the same number of turns as when it was removed, but do not tighten the locknut.