9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-1423004.png)
3. Press on the hub using tool 89 96 704 (KM-500-3 and KM-500-5).
4. Fit the drive shaft in the hub and push it home with a new hub centre-nut.
Important: Always fit a new hub-centre nut if it has been removed because the clamping force of the lock indentations will be reduced if the old
one is refitted.
Use a nut with top groove.
5. Fit the holder for the ABS sensor and disc back-plates.
6. Fit the steering swivel member ball-joint in the steering swivel member and the bolt securing the steering swivel member to the ball-joint. Fit the
nut. Make sure that the bolt fits in the recess on the steering swivel member ball-joint.
7. Press the steering swivel member into the MacPherson strut and put in place the bracket for the ABS sensor cable and the brake hose. Tighten the
bolts securing the steering swivel member to the MacPherson strut.
Tightening torque 100 Nm +45° (75 ft. lbs. +45°).
8. Tighten the bolt securing the steering swivel member to the steering swivel member ball-joint.
Tightening torque 85 Nm (65 ft. lbs.)
