saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

System Overview|Page 8144 > < System Overview|Page 8142
Page 7
background image

Battery voltage (+30 circuit)

Current (+30 circuit) is supplied via fuse 8 (22a) to pin 5 of the SID connector.

Battery voltage (+15 circuit) 

Current (+15 circuit) is supplied via fuse 27 (22a) to pin 25 of the SID connector.
The SID is activated by current from the +15 circuit.

Diagnostics

If no current from the +30 circuit is present, the display will not be active and diagnostic communication will not be possible.

If no current from the +15 circuit is present, the display will not be active but can be turned on via the bus by switching on the radio, for example.

System Overview|Page 8144 > < System Overview|Page 8142