saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Front Cross-Member|Specifications|Page 9289 > < Front Cross-Member|Specifications|Page 9287
Page 7
background image

18. R4 engine: Fit the engine oil cooler.
19. Fit the air cleaner retaining nuts.

20. R4 engine: Raise the front exhaust pipe section and tighten the joint between the catalytic converter and the silencer as well as the connection to

the turbocharger. Refit the temperature sensor where appropriate.
Tightening torque 25 Nm (20 ft. lbs.) 
V6 engine: Fit the exhaust pipe to the rear exhaust manifold.
Fit the exhaust pipe to the catalytic converter and the silencer.
Tightening torque 40 Nm (30 ft. lbs.) 

21. Fit the air shields.
22. Fit the wheels,

Tightening torque 110 Nm (81 ft. lbs.) 
Lower the car to the floor.

Front Cross-Member|Specifications|Page 9289 > < Front Cross-Member|Specifications|Page 9287