saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear Cross-Member Bushing|Service and Repair|Page 9303 > < Rear Cross-Member Bushing|Service and Repair|Page 9301
Page 3
background image

8. Press out the bush using Press tool 89 96 761 with tool KM-906 (KM-906-70, KM906-11, KM-906-12).

To fit 

1. Press in a new bush using Press tool 89 96 761 with tool KM-906 (KM-906-70, KM906-13, KM-906-14).
2. Raise the subframe into position but do not tighten the retaining bolts.

Rear Cross-Member Bushing|Service and Repair|Page 9303 > < Rear Cross-Member Bushing|Service and Repair|Page 9301