9-5 Arc Sport Wagon (9600) V6-3.0L Turbo (B308) (2002)
/v6-3.0l_turbo_(b308)/Page-2886001.png)
Spoiler: Procedures
Bumper and Spoiler, Deep Scratches and Cracks
Bumper And Spoiler, Deep Scratches And Cracks
1. Clean the part. It is essential that no grit or other particles remain in the area to be welded.
2. Wash the repair area with Teroson FL cleaner.
3. Identify the type of plastic.
4. Select the correct welding filler and set the temperature of the welding gun so that it agrees with the type of plastic.
5. If the damage is a crack, the ends must first be drilled so that the crack does not spread. Use a 3.5 mm drill and drill a hole at both ends of the
crack.
6. Mill a 90 degrees V-shaped groove in the reverse. Only use a low speed grinder.
7. Select the correct welding temperature on the welding gun, so that it agrees with the type of plastic.
