9-5 Arc Sport Wagon (9600) V6-3.0L Turbo (B308) (2002)
^
Start by checking that the control module is receiving power and is grounded.
^
Check all sensor inputs and signals from other systems.
^
Finally, check the control module outputs. Remember that the readings do not provide an indication that the actuator is operating.
^
If any reading is not OK, consult the wiring diagram to trace the leads, connectors or components that need further checking.
^
The specified readings are valid for a correctly calibrated Fluke 88/97.
^
The readings %(+) and ms(+) indicate the pulse ratio and pulse length. A test instrument capable of measuring both pulse ratio and pulse length
must be used. The "+" sign denotes a positive trigger pulse (TRIG+).