saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Radiator|Page 2630 > < Radiator|Page 2628
Page 8
background image

7. Fill with coolant. Do not forget to close the drain plug on the radiator first. Refer to Coolant for mixtures.
8. Vent the cooling system as follows:

Note:  The A/C should be OFF.

Fill the system to the MAX level and close the lid of the expansion tank. Start the engine and run unloaded until warm at varying engine speeds
until the radiator fan starts. Open the lid of the expansion tank and top up to the MAX level. Close the expansion tank lid and let the engine run at
varying engine speeds until the radiator fan has started three more times. Switch off the engine and top up as necessary to the MAX level.

9. Raise the car.

10. Check for any leakage.
11. Fit the lower front cover.
12. Lower the car to the floor.

Radiator|Page 2630 > < Radiator|Page 2628