saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Thermostat, Engine Cooling > < Coolant Temperature Sensor (202)|Page 2674
Page 5
background image

6. After fitting, top up with coolant as necessary. Dilute the coolant with water to a mixture of 1:1 (equal parts water and coolant).

Start the car and run it warm. Make sure no leaks have occurred. Top up with coolant if necessary.

Fit the cover.

Tightening torque: 13 Nm (9.6 lbf ft)

Thermostat, Engine Cooling > < Coolant Temperature Sensor (202)|Page 2674