saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Removal of Pistons (In Car)|Page 2195 > < Removal of Pistons (In Car)|Page 2193
Page 2
background image

If the contact surfaces are damaged in any way, the connecting rod must be changed as an accurate fit cannot then be assured.
Clean the contact surfaces with compressed air.

7. Check that there are no impurities in the sump and clean the mating surfaces. Use suitable cleaner.
8. Seal all partition joints with part No. (10) 81 52 381.

Removal of Pistons (In Car)|Page 2195 > < Removal of Pistons (In Car)|Page 2193