9-5 Arc Sport Wagon (9600) V6-3.0L Turbo (B308) (2002)
/v6-3.0l_turbo_(b308)/Page-678004.png)
Measure clearances with (45) 30 06 558 Plastigage)
Important: When measuring clearances with Plastigage, make sure that none of it gets into the oil holes.
1. Clean the parts that are to be measured. Place a strip of Plastigage along the shaft.
2. Fit the bearing cap.
Tightening torque: 35 Nm (26 ft. lbs.) + 45° ± 15°
The crankshaft must not be rotated during measurement.
3. Remove the bearing cap. The strip of Plastigage should now have adhered to either the bearing cap or the main journal.
