9-5 Arc Sport Wagon (9600) V6-3.0L Turbo (B308) (2002)
Blower Motor: Procedures
Ventilation Fan
To Remove
1. Drape protective covers over the front wings.
2. Put the air recirculation control in position OFF.
Ignition switch in the OFF position.
3. Remove the wiper arms with special tool 85 80 144 Puller, windscreen wiper arm.
4. Remove the rubber seals from the wiper spindles.
5. Loosen the rubber moulding along the edge of the bulkhead in the middle only. Leave the outer clips in place.
6. Loosen the cover over the bulkhead partition space (fastened with clips) by lifting it carefully forwards so that it is released from the windscreen.
Hold the wire to the bonnet release to one side and lift the cover backwards towards the windscreen.
Note: Take care when remove the clips.