saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Evaporator Drain Tube|Testing and Inspection|Page 6886 > < Procedures|Page 6882
Page 1
background image

Evaporator Drain Tube: Testing and Inspection

Checking The Drainage Hoses On The Heating And Ventilation Unit

Check

To check that the hoses that drain condensation from the evaporator have not become clogged, proceed as follows:

1. Allow the car to idle.
2. Set the temperature to LO on both sides.
3. Make sure that the fan is running at MAX and that air is only administered from the panel vents.
4. Close all the vents, including the rear vents.
5. Check that air is blowing or water is running out of the hoses on both sides under the car. If no water or air comes from the hoses, the hoses must

be cleaned.

Evaporator Drain Tube|Testing and Inspection|Page 6886 > < Procedures|Page 6882