saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Tune-up and Engine Performance Checks > < Measuring the Height of the Car Before Checking Wheel Alignment|Page 1676
Page 7
background image

Note:  Only one shim may be fitted.

13. Tighten the hub nuts (4x)

Tightening torque 50 Nm +30° (37 ft. lbs. +30°) 

14. VIN X3025752-: Fit the attachment for the wheel sensor and the brake pipe.

Tightening torque 24 Nm (18 ft. lbs.) 

15. VIN X3025752-: Fit the wheel sensor cable into the attachment.
16. Plug the connector into the wheel sensor.
17. Fit the attachment for the parking brake wire.

Tightening torque 8 Nm (6 ft. lbs.). 

18. Fit the air separator.
19. Fit the wheel.

Tightening torque 110 Nm (81 ft. lbs.).

20. Apply the handbrake.
21. Check wheel alignment.

Tune-up and Engine Performance Checks > < Measuring the Height of the Car Before Checking Wheel Alignment|Page 1676