saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3457 > < Initial Inspection and Diagnostic Overview|Page 3455
Page 2
background image

1.C. Pull out the sheath to undo the connector catch.

After plugging the connector in, press in the sheath to lock the connector.

1.D. Press in the catch on the wire clamp and tip the wire forward.

Plug in the connector and lock it by raising the wire clamp.

NOTE:  Make sure the wire clamp is locked in the correct position, to ensure good contact in the connector.

1.E. Raise the catch to release the connector.

Make sure the connector is securely locked when plugged back in.

Initial Inspection and Diagnostic Overview|Page 3457 > < Initial Inspection and Diagnostic Overview|Page 3455