9-5 Arc Sport Wagon (9600) V6-3.0L Turbo (B308) (2002)
/v6-3.0l_turbo_(b308)/Page-2091004.png)
8. Pull the cables through the hole in the backrest upholstery and secure the upholstery retaining strips to the lower edge.
9. Connect the cables and fit new cable ties.
10. Secure the bottom of the backrest upholstery by fitting the straps underneath.
11. Lift the seat into the car and plug in the 29-pin connector. Secure the straps under the seat to the pullmaflex net.
12. If the seat-belt has been taken off, re-attach it to the seat.
Slide the rails into the front keys.
Insert the front screws and run the seat forward.
Insert the rear bolts.
Manually adjustable seat. Check that the catches on right and left sides have engaged.
Tighten the rear bolts using a torque wrench.
Slide the seat to the rear.
Manually adjustable seat. Check that the catches on the right and left sides have engaged.
Tighten the front bolts using a torque wrench.
