9-5 Arc Sport Wagon (9600) V6-3.0L Turbo (B308) (2002)
/v6-3.0l_turbo_(b308)/Page-2091005.png)
Tightening torque 24 Nm (18 lbf ft)
Check the SRS system and control module with diagnostic tools according to the following:
With the ignition switched to the ON position, connect the diagnostic tool to the diagnostic socket under the dashboard. Clear any diagnostic trouble
codes that are present.
Turn the ignition off and on again. Wait at least 10 seconds with the ignition on.
Check whether a diagnostic trouble code is shown:
If a diagnostic trouble code is shown:
Carry out fault diagnosis in accordance with the directions given for each DTC.
If no diagnostic trouble code is shown:
The installation is successful. Disconnect the diagnostic tool.
