saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Campaign - R/H Headlamp Cover Replacement|Page 5652 > < Campaign - R/H Headlamp Cover Replacement|Page 5650
Page 5
background image

2. Position the starter motor, lowering it between the exhaust manifold and bulkhead.
3. Insert the lower starter motor bolt.
4. Fit the upper starter motor bolt.
5. Raise the car.
6. Tighten the lower starter motor bolt.
7. Plug in the starter motor connector.

8. Plug in the generator connector.
9. Plug in the oil pressure sensor connector.

10. Fit the clip that secures the wiring harness to the generator.

Campaign - R/H Headlamp Cover Replacement|Page 5652 > < Campaign - R/H Headlamp Cover Replacement|Page 5650