9-5 Arc Sport Wagon (9600) V6-3.0L Turbo (B308) (2002)
24. Remove two retaining bolts securing the steering gear.
25. Lift out the steering gear through the passenger-side wheel housing. The rear engine cushion must be removed at the same time as the steering
gear. Angle the steering gear forward so that it does not foul adjacent components. Keep the bulkhead seal.
Important: Take care to avoid damaging the gaiters.
To fit
Important: The power steering system is extremely sensitive to contamination. Therefore, observe a high degree of cleanliness when working on the
power steering system.
1. Turn the steering gear's pinion shaft so that the rack is centered and lift in the steering gear through the passenger-side wheel housing. Make sure
that the steering gear does not foul any hoses or cables in the engine bay. The rear engine cushion must be lifted in at the same time as the steering
gear.
Important: Take care to avoid damaging the gaiters.