saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Steering Mounted Controls Assembly > < Steering Gear, V6 Engine|Page 5988
Page 3
background image

5. Bolt the track-rod end to the steering swivel member.

Tightening torque 60 Nm (45 ft. lbs.). 

6. Fit the wheel.

Tightening torque 110 Nm (81 ft. lbs.). 
Lower the car to the floor.

7. Check the toe angle and adjust as necessary, see Alignment.
8. Tighten the track rod's locknut.

Tightening torque 70 Nm (55 ft. lbs.).

Steering Mounted Controls Assembly > < Steering Gear, V6 Engine|Page 5988