saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Control Module Connection Test Values, Rain Sensor|Page 11640 > < Control Module Connection Test Values, Rain Sensor|Page 11638
Page 2
background image

3. Press out the ends of the clamps from the retainers on the windscreen bracket. It helps if you press the sensor towards the windscreen. Bend out the

clamps and remove the sensor from the bracket.

NOTE:  Take care when releasing the clamps so as not to scratch the windscreen.

4. Unplug the connector from the rain sensor.

To fit

1. Clean the windscreen where the rain sensor is to be placed.
2. Plug in the connector on the rain sensor.

Control Module Connection Test Values, Rain Sensor|Page 11640 > < Control Module Connection Test Values, Rain Sensor|Page 11638