9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Front Bumper Cover / Fascia: Service and Repair
Bumper Shell, Front
To remove
1. Cars with engine block heater: Remove the connector, 2 screws and 2 nuts.
E85: Remove the retaining clip and the connector from the engine heater. Remove the ground cable and cable tie.
2. Raise the car and remove the front spoiler shield.
3. Lower the car to a suitable work height.
4. Remove the bumper shell bolts at the wing liner on both sides.