saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Front Bumper Cover / Fascia|Service and Repair|Page 11572 > < Front Bumper Cover / Fascia|Service and Repair|Page 11570
Page 7
background image

7. Press the shell rearward and press the shell into the retainer on the left side.
8. Fit the wing liner bolts on the left side.

Cars with engine block heater: Fit the connector in the holder and tighten it with 2 screws and 2 nuts. The cover must open towards the centre of
the car.
E85: Plug in the connector for the engine heater and fit the retaining clip over the connector. Fit the ground cable and cable tie.

9. Raise the car.

10. Front the front spoiler shield.

Front Bumper Cover / Fascia|Service and Repair|Page 11572 > < Front Bumper Cover / Fascia|Service and Repair|Page 11570