9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
should arise, the entire headlining must be changed. Damaged energy absorbers may impair head protection in case of a collision.
1. Fit the bottom of the trim in place.
2. Fit the clip with the strap downwards in the trim.
NOTE: It is important that the strap on the clip is intact.
3. Press the trim into all the clips.
4. Fit the door weatherseal.
NOTE: Check that the door sealing moulding fits correctly.
B-Pillar Trim
B-pillar Trim
To remove
WARNING: Take care not to damage or loosen the energy absorbers. Damaged or loose energy absorbers must not be refitted. If the occasion
should arise, the entire headlining must be changed. Damaged energy absorbers may impair head protection in case of a collision.
1. Move the seat as far forward as possible.
2. Cars with PPS: Remove the cover. Unplug the belt force sensor's connector. Remove the seatbelt's mounting by pressing in the catch with a
screwdriver.