9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-2192001.png)
Brake Fluid Pressure Sensor/Switch: Service and Repair
Brake pressure sensor
To remove
1. Unplug the connector from the pressure sensor.
Note: The connector has a locking device that must be released.
2. Remove the pressure sensor using a 24 mm open-ended spanner.
To fit
1. Remove the pressure sensor.
2. Plug in the connector to the pressure sensor.
3. Bleed the primary circuit (front left and rear right wheels).
