9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-944004.png)
6. Fit the right-hand engine mounting.
Tightening torque 50 Nm (37 ft. lbs.).
7. Remove the wedge and fit the power steering pump pipe.
8. Fit the belt circuit cover and the wheel.
Tightening torque: 110 Nm (80 ft. lbs.).
Important: The wheels must be hanging freely when the wheel bolts are tightened.
9. Start the engine and run it at idling speed for a while.
10. Switch off the engine and check that the belt is correctly positioned.
