9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-773001.png)
Drive Belt: Service and Repair
Drive Belt For Auxiliaries
To Remove
1. Drape protective sheets over the wings and remove the cover over the intake manifold.
2. Raise the car, turn the right-hand front wheel outwards and disconnect the power steering pump pipe from the subframe.
3. Drive in wedge 83 95 238 between the oil sump and subframe.
4. Disconnect the mass air flow sensor's rubber gaiter and move it aside.
5. Remove the right-hand engine mounting with yoke.
6. Take the strain off the belt tensioner with the aid of a ratchet handle extension and insert a 3 mm hexagon key in the hole.
