9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Transmission Speed Sensor: Service and Repair
Output Shaft Speed Sensor
Output Shaft Speed Sensor
To remove
1. Remove the battery cover and the battery.
2. Remove the MAXI fuse board and place it to one side. Remove the battery tray.
3. Disconnect the electrical distribution unit and move it aside.
4. Clean the area round the sensor. Remove the retaining bolt and withdraw the sensor.
5. Unplug the sensor's connector.
Fitting
1. Plug in the sensor's connector.