9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-302003.png)
5. Press in place the corners of the protection shell and poke the tabs under the screws using a screwdriver.
6. Press the clips onto the bottom edge of the protection shell. Check the fit.
7. Press down on the protection shell while tightening the screws.
8. Fit the corner protection strips.
9. Close the luggage compartment and check the fit.
Changing holder
1. First, press in the large snap-fastener and then the small snap-fasteners and remove the holder from the strip.
