9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
1. Plug the connector into the side impact sensor.
WARNING: Make sure the connector faces downwards.
2. Screw the side impact sensor in place. Make sure the cable to the side impact sensor does not get trapped.
Tightening torque: 5 Nm (3.7 lbf ft)
3. Fit the moisture barrier. Plug in and fit the loudspeaker.
IMPORTANT: Check that the moisture barrier seals against the door's inner panel and make sure that it is not damaged.
4. Refit the door lamp.