9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
3. Tighten the bolt securing the anti-roll bar to the longitudinal link.
Tightening torque 50 Nm (40 ft. lbs.)
4. Tighten the bolt securing the upper transverse link to the longitudinal link.
Tightening torque 90 Nm + 60° (70 ft. lbs. + 60°) .
5. Tighten the bolt securing the lower transverse link to the longitudinal link.
Tightening torque 90 Nm + 60° (70 ft. lbs. + 60°) .
6. Tighten the subframe retaining bolts.
Tightening torque 90 Nm + 60° (70 ft. lbs. + 60°).
7. Hook the exhaust system's rear and center rubber hangers into place.
8. Fit the wheel.
Tightening torques
aluminium rim 110 Nm (81 ft. lbs.)
pressed steel rim 50 Nm + 2 x 90°, max. 110 Nm (37 ft. lbs. + 2 x 90°, max. 81 ft. lbs.)
Lower the car to the floor.
9. Tighten the bolts securing the transverse links to the subframe.