9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Shift Solenoid: Service and Repair
Solenoids
To Remove
IMPORTANT: Solenoids SLT, SLS and SLU that control the system pressure and Lock-up must not be dismantled!
1. Remove the valve housing cover.
2. Unplug the relevant solenoid's connector.
3. Remove the solenoid's retaining bolt.
4. Prise the solenoid loose, using a screwdriver.
Fitting
1. Position the solenoid and tighten the bolt.
Tightening torque: 7 Nm (5 ft. lbs.).