9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-1869001.png)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Switch
Clutch Pedal Switch
To Remove
1. Remove the pedal bracket cover by undoing the 3 screws and the clip. Tilt the cover and carefully pull it out. Pay attention to the cables for the
diagnostic tool data link connector and the lighting.
2. Depress the clutch pedal.
3. Extract the red sleeve on the switch until it clicks.
4. Detach the switch by pressing in the catches with an electricians screwdriver or similar tool.
5. Unplug the connector once the switch is loose.
To Fit
1. Spray the connector with Kontakt 61 (part no. 30 04 520).
