9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-1877003.png)
19. Move the generator out of the way.
20. Unscrew the support bearing bracket screws.
IMPORTANT: Place a vessel under the gearbox to avoid oil spill on the floor.
21. Fold out the support bearing bracket from the guide pins in the engine block and extract the intermediate shaft from the gearbox.
To Fit
1. Fit 83 95 162 Protective collar, drive shafts into the sealing ring.
IMPORTANT: Always change the shaft seal in the gearbox. Lubricate with transmission fluid.
