9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Wiper Motor Linkage: Service and Repair
Windscreen Wiper Assembly
To remove
1. Remove the retaining nuts from the windscreen wiper arms. Pull off the wiper arms using 85 80 144 Puller, windscreen wiper arm.
2. Remove the protective cover retaining screws and the rubber seals from the wiper spindles.
3. Loosen the rubber moulding along the edge of the bulkhead and let it rest on the wings.
4. Lift off the cover on the bulkhead partition space.
5. Lift off the cover over the centre spindle and the climate housing.
6. Unplug the wiper motor connectors.
7. Remove the 4 wiper assembly retaining screws.
8. Lift out the whole windscreen wiper assembly.