saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Replacement|Page 5702 > < Replacement|Page 5700
Page 4
background image

Lower the car and depress the brake pedal to force out the brake pads.
Check the level of the brake fluid.
Drive the car on test and check the operation of the brakes.

Rear

To remove 
1. Jack up the car and remove the wheel. 

2. Press the brake pistons back, using a pair of slip-joint pliers.
3. Remove the two brake caliper retaining bolts and suspend the brake caliper.

4. Slacken the handbrake adjustment (A).
5. Remove the brake disc retaining bolts and take off the brake disc.

To fit 
1. Before starting to refit the brake disc, wash it clean and check that its surface in contact with the hub is free from rust, burrs and the like.

Replacement|Page 5702 > < Replacement|Page 5700