9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
/l4-2.3l_turbo_(b235)/Page-847012.png)
5. Pull the heat exchanger out slightly and remove the PAD connection. Detach the pipes from the heat exchanger and remove the O-rings.
To fit
Use O-rings having part No. 50 45 885.
1. Lubricate the O-rings with synthetic vaseline. Fit the O-rings on the pipes.
2. Fit the pipes in the heat exchanger and slide the heat exchanger into the heating and ventilation unit.
3. Fit the PAD connection.
Tightening torque: 3-4 Nm (2-3 lbf ft)
4. Screw the heat exchanger in place.
