9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
Tightening torque 1.4 Nm (1 lbf-ft)
Note
Be careful when the heat exchanger is pushed into the heat exchanger housing as the space between the heat exchanger and the upper cam disc
is limited.
4.
Fit the new cover with the 4 screws at the rear air distribution valve. Start with the upper rear screw, then with the lower rear screw.
Tightening torque 1.4 Nm (1 lbf-ft)
Note
Make sure that the air shield on the heat exchanger housing is set against the seal (certain models) and the guide inside the evaporator casing
when the heat exchanger housing is fitted.