saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

A/C - Insufficient Heating/Cooling|Page 7350 > < A/C - Insufficient Heating/Cooling
Page 1
background image

Control Module HVAC: All Technical Service Bulletins
A/C - Insufficient Heating/Cooling

TECHNICAL NEWS

Bulletin Nbr: 02-02-854
Date: February 2002
Market: All

Insufficient heating or cooling

Cars affected

All Saab 9-5 MY02 within VIN range 23023934 - 23026972 having a solenoid valve for the heat exchanger shut-off valve.

Background

In conjunction with the introduction of a new ACC panel with provisions for cars with and without a solenoid valve for the heat exchanger shut-off
valve, diagnostic trouble code generation for this function has been missed in the software. The function of the components is not affected, but this can
make fault diagnosis difficult, for example in cases where a customer complains of reduced heating or cooling performance.

Symptom description

Heating and cooling are experienced as insufficient. No diagnostic trouble code is generated if there is an electrical fault in the solenoid valve for the
heat exchanger shut-off valve.

Parts required

TECH 2, version 43.000

Procedure

After customer complaint regarding reduced heating or cooling for cars within the specified VIN range, program the ACC panel with HEAT
EXCHANGE SOLENOID with the spare part program. Following this, check the function of the system and check for any diagnostic trouble codes. If
there are any diagnostic trouble codes, continue fault diagnosis as prescribed.

A/C - Insufficient Heating/Cooling|Page 7350 > < A/C - Insufficient Heating/Cooling