9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
IMPORTANT
Be careful not to contaminate the new expansion valve.
1. Lubricate the O-rings with synthetic vaseline. Fit the O-rings on the pipes leading from the evaporator.
2. Press the expansion valve onto the A/C pipes and tighten.
Tightening torque: 5 Nm (3.7 lbf ft)
3. Remove the plugs and lubricate the O-rings on the pipes from the compressor and condenser respectively.
4. Press on the A/C pipes to the expansion valve.
5. Locate the pipe holder (washer) against the valve and tighten.
Tightening torque: 8 Nm (5.9 lbf ft)