9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
/l4-2.3l_turbo_(b235)/Page-593001.png)
Hose/Line HVAC: Procedures
Compressor High-Pressure Pipe
Compressor High-pressure Pipe (4 cyl)
The compressor's high-pressure pipe runs from the compressor to the condenser.
To Remove
1. Place the car on a lift.
2. Drain the refrigerant from the A/C system.
3. Detach the inlet hose with mass air flow sensor, without unplugging the connector, and place it on one side.
4. Remove the heat shield from the exhaust manifold.
5. Remove and move away the by-pass pipe including the valve.
