9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
3. Remove the bypass pipe and heat shield.
4. Uncut the cable tie to the oxygen sensor and draw out the cables.
5. Remove the oxygen sensor from the Turbo outlet pipe.
To fit
IMPORTANT
The oxygen sensor is sensitive to impact and jolting and must be handled with care. It is important that the connections between the oxygen sensor and
nipple are gas-tight.
1. Coat the oxygen sensor threads with Molycote 1000 (30 20 971) to prevent binding.
2. Fit the oxygen sensor.
Tightening torque 55 Nm (41 lb ft)