9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
The injectors are supplied with current from the main relay, while the Control module grounds them as follows:
-
Injector 1 is Controlled from pin 45.
-
Injector 2 is Controlled from pin 44.
-
Injector 3 is Controlled from pin 67.
-
Injector 4 is Controlled from pin 68.
The microprocessor Controls the transistor in the firing order so that injection is completed just as the inlet valve in the cylinder in question opens.
Diagnostics
-
If There is an open circuit or short circuit to ground or B+ on any of the injectors, diagnostic trouble code P1676 will be generated.
System Reaction To A Fault
-
Closed loop is blocked.