9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
8. Attach the front exhaust system to the turbo. Grease the studs with Molycote 1000, part No.30 20 971.
Tightening torque: 24 Nm (18 lbf ft)
IMPORTANT
When fitting the front exhaust system to the turbo, the nuts should be tightened alternately to avoid distorting the flange. The flange must not abut
against the turbo connection flange.
9. Fit the heat shield. Press on the left-hand holder first. Apply Molycote 1000, part no. 30 20 971, to the stud.
Tightening torques:
Locknut 20 Nm (15 lbf ft)
10. Mount the bypass valve with pipe. Fit a new O-ring, greased with non-acidic vaseline.
Tightening torque: 8 Nm (6 lbf ft)