9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
1. Position the module and fasten it with the 3 plastic nuts.
2. Plug in the connector on the module.
3. Put the carpet back in place. If necessary, refit the plastic moulding.
4. Refit the front seat.
5. After the TWICE control module is replaced, it must be programmed into the car.
Programming
NOTE: All car keys must be programmed at the same time.
IMPORTANT: The transponders and remote controls that are not available during programming will be rendered unusable.
1. Connect the diagnostic tool.