9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
/l4-2.3l_turbo_(b235)/Page-2299015.png)
5. Thread the belt and guide into the C-pillar trim, push the seatbelt guide into position on the C-pillar trim.
6. Position the C pillar trim by means of the locating pin and press the trim into place.
NOTE: Use new nuts.
7. Fit the lower belt anchorage point, check that the guide pin is located correctly.
Tightening torque: 45 Nm (33 lbf ft)
8. Lift the side trim into place and plug in any connector to the CD player.
9. Fit the screws securing the top of the side trim, starting with the rearmost screw so that the trim will be properly located.
10. Fit the side bolster by hooking in the lower edge and then pressing the upper catch into place.
