9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
4. Remove the air separator.
5. Remove the attachment for the parking brake wire.
6. Unplug the connector from the wheel sensor.
7. VIN X3025752-: Remove the wheel sensor cable from the holder.
8. VIN X3025752-: Remove the attachment for the wheel sensor and brake pipe.
9. Blow clean around the wheel hub.
10. Undo the wheel hub nuts (4x) about 7 turns.
Use a 45mm long 15 mm socket with 3/8 fitting, part no. 30 34 444, and an extension with ball fitting.
11. Blow thoroughly clean in the space between the hub and the link arm.
12. Fit a 0.3 mm shim at the top of the bottom.
If the camber reading is too far towards +: Fit a shim at the bottom.
If the camber reading is too far towards -: Fit a shim at the top.