saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Steering Angle Sensor|Locations|Page 6395 > < Steering Angle Sensor|Locations|Page 6393
Page 2
background image

6. Remove the circlip and the spring washer.
7. Dismantle the bearing carrier with bearing. 
8. Remove the steering wheel angle sensor.

To fit 

1. Fit the steering wheel angel sensor to the shaft. Make sure the groove in the sensor and the heel on the shaft are aligned.
2. Affix and complete the label.

Steering Angle Sensor|Locations|Page 6395 > < Steering Angle Sensor|Locations|Page 6393